Ubiquiti UA-G3-PRO-W UniFi Access Reader G3 Pro with Apple Touch Pass Support - White

Please feel free to contact us about this item, and we will recommend an IT Sales and Service Provider in your area.

Resellers: Log in for pricing and to place orders.

In stock email will be sent.

Instock notification already exists.

Order SKU: Supplier Code:

Summary

Unlock doors effortlessly with Touch Pass for UniFi Access. Enjoy seamless, contactless entry using your mobile device, ensuring secure and convenient access for authorized users.

Unlock doors instantly via Intercom Viewer, mobile phone, UniFi Talk, or web—simple, secure, and connected from anywhere. Whether it’s a pocket-sized keyfob, personalized PIN, or access card, users have convenient, secure ways to unlock.

Unlock using an NFC card or UniFi Identity mobile app
Additional handwave unlock functionality
Entry and exit greeting messages
Connects to UniFi Access Hub using PoE
IP55 weather resistance (-30 to 45° C)

Networking Interface (1) GbE RJ45 port

Connectivity BLE 4.2, NFC

Power Method PoE, UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU

Max. Power Consumption 6W

Supported Voltage Range 48V DC

ESD/EMP Protection Air: ±15kV, contact: ±8kV

Sensors Proximity sensor

Display 120 mm (4.7") diagonal

Touch Screen Technology Capacitive touch

Display Luminance 480 nits (Typical)

Screen Orientation Portrait

Resolution 1280 x 286 px

Microphone Yes

Speaker Yes

LEDs R/G/B/W/Amber Learn More

Button (1) Factory-reset

NFC Frequency 13.56 MHz

NFC Read Range < 30 mm (1.18'')

NFC Technology ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340), MIFARE Classic / MIFARE DESFIRE, Sony FeliCa™ (ID only), NFC Forum tags T1T, T2T, T3T, T4T and T5T, ECP 2.0

PoE Cabling Requirements Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.

UL 294 Statement Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

CAN/ULC-60839-11-1 Grade Grade assignment: I

Dimensions 160 x 40.4 x 40.55 mm

Integrated Camera Yes

NFC Card & Keyfob Access Yes

PIN Access Yes

Apple/Google Wallet Yes

Mobile Unlock Yes

Two-Way Intercom & Doorbell Access Yes

NDAA Compliant Yes

Indoor and Outdoor Use Yes

Ambient Operating Temperature Device: -30 to 45° C, Display: -10 to 45° C

Ambient Operating Humidity 5 to 90% noncondensing