Ubiquiti UACC-POE-PLUS-PLUS-PLUS-10G 10GigE PoE+++ Adapter (90W)

Ubiquiti UACC-PoE+++-10G UniFi 10G PoE+++ Adapter – 90W High-Power PoE Injector (UACC-POE-PL-PL-PL-10G)

The Ubiquiti UACC-PoE+++-10G UniFi 10G PoE+++ Adapter is a high-performance 90W Power over Ethernet injector with 10 Gigabit Ethernet support, designed to power high-demand UniFi devices without requiring a PoE+++ capable network switch. Delivering up to 90W over four-pair PoE while maintaining high-speed Multi-Gigabit Ethernet connectivity, the UACC-PoE+++-10G is ideal for powering advanced UniFi access points, switches, cameras and other compatible high-power PoE devices where maximum network performance and substantial PoE output are required.

Up to 90W PoE+++ Power Output

The UACC-PoE+++-10G delivers up to 90W of PoE+++ power, making it suitable for demanding network devices that require considerably more power than conventional PoE or PoE+ can provide.

Its high-power output makes the adapter useful when deploying equipment that would otherwise require a high-power PoE switch.

The adapter outputs 54V DC at up to 1.67A, providing the power capacity required by compatible PoE+++ devices.

10 Gigabit Ethernet Connectivity

Unlike basic PoE injectors that can become a network bottleneck, the UACC-PoE+++-10G is designed to support Multi-Gigabit Ethernet connectivity up to 10GbE.

This makes it particularly suitable for modern high-performance UniFi devices where both high PoE output and high network throughput are required.

It can be used between a compatible Ethernet switch and powered device without sacrificing the potential 10Gbps wired connection.

This is especially valuable for:

• High-performance Wi-Fi access points
• Multi-Gigabit UniFi devices
• High-bandwidth network infrastructure
• Devices requiring both high PoE power and 10GbE connectivity
• Installations using non-PoE 10GbE switches

Reduce Dependence on Switch PoE Budgets

The UACC-PoE+++-10G provides a practical way to add high-power PoE capability without replacing an existing network switch.

A standard or non-PoE Ethernet switch can provide the data connection, while the UACC-PoE+++-10G independently provides power to the connected device.

This can also be useful with PoE switches where the total available PoE budget is limited. Moving a high-power device onto a dedicated UACC-PoE+++-10G adapter frees switch PoE capacity for other connected equipment.

Potential benefits include:

• Avoiding the need for a PoE+++ switch
• Reducing demand on the switch's PoE budget
• Adding PoE to a non-PoE 10GbE connection
• Powering individual high-demand devices
• Retaining 10GbE network performance
• Simplifying upgrades of existing network infrastructure

Four-Pair PoE Power Delivery

The UACC-PoE+++-10G uses four-pair powering, allowing substantially greater power delivery than older PoE technologies that use only two Ethernet cable pairs for power.

Power is delivered using:

• Pins 1, 2, 4 and 5: Positive (+)
• Pins 3, 6, 7 and 8: Negative (-)

This four-pair architecture enables the adapter to provide the high power required by compatible PoE+++ devices while simultaneously carrying high-speed Ethernet data.

Integrated Surge and Electrical Protection

Network infrastructure can be vulnerable to electrical transients, surges and other power-related events.

The UACC-PoE+++-10G incorporates multiple protection mechanisms designed to protect both the injector and connected equipment.

Protection features include:

• Surge protection
• Peak pulse protection
• Overcurrent protection
• Difference and common-mode surge protection
• Data clamping protection
• Power clamping protection

The adapter provides a maximum surge discharge rating of 1500A at an 8/20µs waveform on the power connection and a peak pulse current rating of 36A at 10/1000µs for data.

Response time is rated at less than 1 nanosecond.

These integrated protection features make the UACC-PoE+++-10G a robust power solution for valuable high-performance network equipment.

Simple Plug-and-Play Installation

The UACC-PoE+++-10G provides a straightforward way to add PoE+++ power to an Ethernet connection.

Installation requires:

1. Connect the network switch or other Ethernet source to the adapter's Data In port.
2. Connect the PoE output to the compatible powered device.
3. Connect the adapter to AC mains power.

The adapter then combines Ethernet data with power and delivers both over the Ethernet cable to the connected device.

No separate network configuration or management software is required.

Flexible Mounting Options

The UACC-PoE+++-10G has been designed for flexible installation in network cabinets, communications rooms and other infrastructure environments.

Supported installation options include:

• Wall mounting
• DIN rail mounting
• Floating mounting

This allows the injector to be installed neatly alongside other network equipment rather than being left loose within a cabinet or equipment area.

DIN rail and floating mount accessories are available separately.

Universal AC Power Input

The UACC-PoE+++-10G supports a wide 100–240V AC, 50/60Hz input range, allowing it to operate across common mains power environments.

A power cable is included with the adapter.

The unit provides a 54V DC, 1.67A output with efficiency rated at greater than 88%.

Ideal Applications for the UACC-PoE+++-10G

The Ubiquiti 10G PoE+++ Adapter is particularly useful for:

• High-power UniFi PoE+++ devices
• Multi-Gigabit Wi-Fi access points
• High-performance network infrastructure
• 10GbE devices requiring PoE
• Networks using non-PoE switches
• Installations with insufficient switch PoE budget
• Individual high-power PoE device deployments
• Network upgrades where replacing the existing switch is unnecessary
• Test benches and equipment staging
• Commercial and enterprise UniFi installations

Technical Specifications

Why Choose the Ubiquiti UACC-PoE+++-10G?

The Ubiquiti UACC-PoE+++-10G is designed for installations where both high PoE power and high network bandwidth are required.

With up to 90W PoE+++ output and 10 Gigabit Ethernet support, it provides significantly more capability than a conventional Gigabit PoE injector. This makes it particularly valuable for modern UniFi equipment where using a lower-speed injector could restrict network performance.

It can also provide a cost-effective alternative to replacing an otherwise suitable network switch simply because the switch lacks sufficient PoE power. By supplying power independently, the UACC-PoE+++-10G allows compatible high-power devices to operate from non-PoE network connections or removes their power requirements from the switch's overall PoE budget.

Integrated surge, peak pulse and overcurrent protection provide additional protection for connected equipment, while flexible wall, DIN rail and floating mounting options simplify installation.

For high-performance UniFi deployments requiring up to 90W PoE+++ and 10GbE connectivity, the UACC-PoE+++-10G provides a simple, compact and purpose-built power solution.