Ubiquiti UACC-RETROFIT-POE-2WIRE UniFi PoE Over 2-Wire Retrofit Extender

UniFi PoE Over 2-Wire Retrofit Extender

A pair of extenders that extends PoE over twisted-pair or coaxial cables, ideal for retrofit scenarios

Please feel free to contact us about this item, and we will recommend an IT Sales and Service Provider in your area.


Resellers: for pricing and to place orders.

In stock email will be sent.
Instock notification already exists.
Order SKU: Supplier Code:

UBIQUITI UACC-RETROFIT-POE-2WIRE POE OVER 2-WIRE RETROFIT EXTENDER

The Ubiquiti UACC-Retrofit-PoE-2Wire carries network data and PoE over an existing two-wire or coaxial cable run. Supplied as a transmitter and receiver pair, it helps installers add a PoE device where replacing legacy cabling would be difficult.

REUSE EXISTING CABLING FOR POE DEVICES

Connect the transmitter to a PoE++ source and the receiver to a PoE or PoE+ device. The pair uses the existing cable between them to carry data and power, making it useful for retrofit door access and other installations with suitable legacy wiring. Two-wire to BNC adapters are provided for coaxial connections.

CHECK POWER AND SPEED AGAINST THE CABLE RUN

The receiver’s PoE output and available bandwidth depend on cable type and length. Ubiquiti rates a 50 m run at up to 25 W and 85 Mbps using either its specified 24 AWG twisted pair or RG-6 coaxial cable. At 100 m, the stated power falls to 13 W on twisted pair or 20 W on RG-6. Check the intended device’s power requirement against the cable run before installation; this is a 10/100 MbE solution, not a Gigabit link.

Specification

Details

Model

UACC-Retrofit-PoE-2Wire

Product type

PoE over 2-wire retrofit extender pair

Transmitter

PoE++ input; 2-wire output

Receiver

2-wire input; PoE/PoE+ output

Network interface

10/100 MbE; HomePlug AV over the existing cable

Power input

PoE++, 50 V DC, 1.2 A

PoE output

PoE+, 48 V DC, 0.6 A; usable power varies with cable type and length

Published 50 m performance

Up to 85 Mbps and 25 W using specified 24 AWG twisted pair or RG-6 coaxial cable

Published 100 m performance

Up to 85 Mbps; 13 W on specified 24 AWG twisted pair or 20 W on RG-6

Coaxial connection

BNC female via supplied 2-wire to BNC adapters

Dimensions

Transmitter and receiver: 40 × 105 × 25 mm each

Operating temperature

−10°C to 40°C

Supplied configuration

Transmitter and receiver pair, with a 2-wire to BNC adapter for each end