DrayTek DSP2540XS 54-Port Managed 10GbE POE+ Switch (6x 10GbE SFP+ slots, 48x GbE ports)

L2+ Managed PoE Gigabit Switch

• 48 x Gigabit Ethernet Ports with PoE+
• 6 x 10GbE SFP+ slots
• Up to 216 Gbps switching capacity
• PoE ports 802.3at and 802.3af compliant providing up to 30W per port
• PoE power budget of 400 watts?
• Up to 216 Gbps switching capacity
• 802.1q tagged VLANs (MAC address, and protocol)

Voice and Surveillance VLANS with QoS (OUI Mode) providing improved call and video quality

ONVIF (Open Network Video Interface Forum) compliant

QoS with 8 queues for traffic prioritisation

Enterprise-Level security features

• 802.1x Port Security, ACL, IP Source Guard and DHCP Snooping
• Access Control (IPv4, IPv6 and MAC address)

Support IPv6 with MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver

Authentication by local database, multiple RADIUS, and TACACS+ server

IEEE 802.3az (Energy-Efficient Ethernet) Compliant

Support SNMP v1/v2c/v3, RMON, and Syslog for network monitoring

Port Mirroring & Link Aggregation

1 x RJ-45 console port

Compliant with Central Switch Management features of DrayTek Vigor devices for simplified network management Learn more

Compliant with VigorConnect free software for local network management Learn more

Supports VigorACS 3 Central Management Software for remote management

2 years back to base warranty

An Ideal Core Switch for SME/SMB
The DrayTek VigorSwitch P2540xs is a Layer 2+ Managed 10GbE PoE switch. It has 48 x GbE PoE+ ports providing 400W power budget and 6 x 10GbE SFP+ slots. Supporting advanced Layer 3 features, DHCP Server and VLAN Routing, the VigorSwitch P2540xs improves network efficiency and helps your network to work continuously even when the gateway is offline, making it ideally utilised as the core switch in SME/SMB.

• 48x PoE/PoE+ : 10/100/1000Mbps Ethernet, RJ-45
• 6x 10G SFP+ : 1000Mbps/10Gpbs fiber slot
• 216 Gbps Switching Capacity
• 16 Mbit Buffer Size
• 400 watts : PoE Power Budget

Auto Surveillance & Voice VLAN
Recognize traffic from IP cameras and IP phones automatically and add CoS tag for QoS prioritization.

10G SFP+
Provides 10G-capable fiber SFP+ ports for aggregation or uplinking to the core switches.

ONVIF-Friendly
Recognise ONVIF devices, display surveillance topology, provide UI for video streaming and device maintenance. Learn more

IPv6 Ready
VigorSwitch G2540xs supports IPv6 by offering MLD Snooping, IPv6 ACL, and IPv6 DNS Resolver.

Wire-Speed VLAN Routing
Improve overall network performance by using VigorSwitch G2540xs to route the inter-VLAN traffic directly and offload the router.

Web-Based GUI
Easily manage and monitor the network through the web-based console with graphics showing ports and hardware status. See demo

IP Conflict Prevention
Improve network stability by avoiding IP conflicts caused by a misconfigured or malicious host. Learn more

Multiple Admin Accounts
Multiple Admin accounts with two levels of administrator privilege.

Access Control
VigorSwitch G2540xs supports ACL by IP/MAC and 802.1x port access control with RADIUS to filter unauthorized hosts.

Central Switch Management
Set up VLANs easily from the router and get a centralised hierarchy view of the switches. Learn more

QoS (Quality of Service)
Improve the performance of critical traffic by prioritizing the traffic with CoS, DSCP, and IP Precedence tag.

Energy-Efficient Ethernet
Compliant with IEEE 802.3az to reduce power consumption.

Ping Device Check
Enable Ping check to selected devices to keep monitoring on their status. If ping timeout, power cycle (if PoE enabled) the port and/or send out mail alert.

Advanced Layer 2+ Features

DHCP Server & VLAN Routing

Improving LAN Network Sustainability and Efficiency, with or without a Router

In a large LAN network, much traffic doesn’t go to Internet, but to the servers in LAN. For example, IP cameras store videos to NVR, IP phones register to PBX, clients access to file server, etc.

L2+ switch with DHCP server and VLAN routing functionalities, as the device receiving traffic before the router, is ideal to share the loading of your router and to help your LAN network to work continuously even when the router is offline.

As a DHCP server, VigorSwitch assigns dynamic IP addresses for up to 8 VLANs. With VLAN routing, VigorSwitch supports up to 512 routes.

Bind IP to MAC

Reserve an IP Address for an Important Device

As a DHCP Server, layer 2+ VigorSwitch helps reserving IP addresses for your important devices that most users will access frequently.

ONVIF-Friendly

Recognise ONVIF devices in different VLANs, display surveillance topology, provide UI for video streaming and device maintenance

Centralised Hierarchical View
VigorSwitch automatically detects ONVIF devices, and displays the topology of connecting IP cameras and NVRs.

Image Viewing
Images filmed by IP cameras can be viewed directly on VigorSwitch.

Device Management
Support ONVIF devices basic configuration/maintenance remotely via VigorSwitch. Such as remote reboot, factory reset, network settings, etc.

ONVIF Snapshot Alert

Locating Non-Responding IP Cameras Made Easy

It’s already difficult to manage several IP cameras across different locations and customers, not to mention to keep monitoring on which camera stops functioning.

To help on this task, VigorSwitch keeps pinging on the ONVIF IP cameras and taking snapshots from them periodically, and sends out an email alert with the latest snapshot when a camera not responding.

With PoE models, VigorSwitch can also provide first aid to automatically power cycle the particular port to reboot the camera.

Specifications