Teltonika TSW202 10-Port Managed PoE+ Switch, 2x GigE PoE+, 2x SFP (no PSU)
DIN Rail Mountable Managed PoE+ Switch
8 x 10/100/1000 Mbps ETH-ports PoE+ switch with 2 x SFP
The TSW202 is a managed PoE+ switch, designed to provide granular network management capabilities while centralizing power distribution.
This PoE+ switch enables flexibility over solution management and power supply and enhances M2M communication by supporting a wide range of industrial protocols, including EtherNet/IP, Profinet, and MRP. The TSW202 has 2 high-performance SFP ports for long-range fibre optic communication and 8 Gigabit Ethernet ports providing 30 W of power each.
- L2 with additional L3 features for enhanced management and control
- 8 x port PoE+ switch with 2 x SFP ports for fibre optic communication
- Supports Profinet for automated data processing alongside other protocols, like EtherNet IP and MRP
- Teltonika Networks OS for switches, intuitively designed for infinite configurations
- Configure via RMS
- Choose from optional 62W or 250W power supply
In the Box
TSW202 switch
QSG (Quick Start Guide)
Power supply not included
|
Ethernet |
Multi-layer managed 8 x ETH ports, 10/100/1000 Mbps supports auto MDI/MDIX crossover |
|
Fibre |
2 x SFP ports |
|
IEEE 802.3 series standards |
802.3af, 802.3at, IEEE 802.1p, IEEE 802.1Q, 802.3az |
|
PoE ports |
Port 1 - 8 |
|
PoE standards |
802.3af and 802.3at |
|
PoE Max Power per Port (at PSE) |
30 W |
|
Total PoE Power Budget (at PSE) |
240 W (DC input of 44 – 57 VDC required for PoE) |
|
Maximum Ethernet cable length |
100 m |
|
Services |
EtherNet/IP, Profinet (class B), SNMP V2, V3, LLDP |
|
MRP |
MRP client role, MRP manager role |
|
L2 features |
Loop protection, Forwarding table, VLAN, STP/RSTP |
|
DHCP |
DHCP server, DHCP client |
|
Port Settings |
Enable/disable, link speed control, port isolation, PoE Management, EEE (802.3az) management, Port Mirroring |
|
L3 Features |
Static IPv4 routing, static IPv6 routing, DHCPv6 client, static IPv6 address |
|
QOS |
Port priority, DSCP priority, 802.1p priority, TOS |
|
Scheduling method |
SP/WFQ/WRR |
|
Bandwidth control |
Rate limiting, storm control |
|
RAM |
128MB, DDR3 |
|
FLASH storage |
16 MB serial flash |
|
Bandwidth (Non-blocking) |
20 Gbps |
|
Packet buffer |
512 KB |
|
MAC address table size |
8K entries |
|
Jumbo frame support |
10000 bytes |
|
Power Connector |
2-pin industrial DC power socket |
|
Input voltage range |
7 – 57 VDC (Power Supply not Included) |
|
PoE-out input voltage range |
44 – 57 VDC |
|
Power consumption |
Idle: 3 W, Max: 8 W; PoE Max: 248 W |
|
Status LEDs |
1 x Power LED, 1 x Aux LED, 16 x ETH status LEDs, 2 x SFP status LEDs |
|
Reset |
Software reset button |
|
Casing material |
Anodized aluminium housing and panels |
|
Dimensions (W x H x D) |
132 x 44.2 x 122.2 mm |
|
Weight |
610 g |
|
Mounting options |
Integrated DIN rail bracket, wall mounting (additional kit needed), flat surface placement |
|
Operating temperature |
-40 °C to 75 °C |
|
Operating humidity |
10% to 90% non-condensing |
|
Ingress Protection Rating |
IP30 |
|
Ethernet |
Multi-layer managed 8 x ETH ports, 10/100/1000 Mbps supports auto MDI/MDIX crossover |
|
Fibre |
2 x SFP ports |
|
IEEE 802.3 series standards |
802.3af, 802.3at, IEEE 802.1p, IEEE 802.1Q, 802.3az |
|
PoE ports |
Port 1 - 8 |
|
PoE standards |
802.3af and 802.3at |
|
PoE Max Power per Port (at PSE) |
30 W |
|
Total PoE Power Budget (at PSE) |
240 W (DC input of 44 – 57 VDC required for PoE) |
|
Maximum Ethernet cable length |
100 m |
|
Services |
EtherNet/IP, Profinet (class B), SNMP V2, V3, LLDP |
|
MRP |
MRP client role, MRP manager role |
|
L2 features |
Loop protection, Forwarding table, VLAN, STP/RSTP |
|
DHCP |
DHCP server, DHCP client |
|
Port Settings |
Enable/disable, link speed control, port isolation, PoE Management, EEE (802.3az) management, Port Mirroring |
|
L3 Features |
Static IPv4 routing, static IPv6 routing, DHCPv6 client, static IPv6 address |
|
QOS |
Port priority, DSCP priority, 802.1p priority, TOS |
|
Scheduling method |
SP/WFQ/WRR |
|
Bandwidth control |
Rate limiting, storm control |
|
RAM |
128MB, DDR3 |
|
FLASH storage |
16 MB serial flash |
|
Bandwidth (Non-blocking) |
20 Gbps |
|
Packet buffer |
512 KB |
|
MAC address table size |
8K entries |
|
Jumbo frame support |
10000 bytes |
|
Power Connector |
2-pin industrial DC power socket |
|
Input voltage range |
7 – 57 VDC (Power Supply not Included) |
|
PoE-out input voltage range |
44 – 57 VDC |
|
Power consumption |
Idle: 3 W, Max: 8 W; PoE Max: 248 W |
|
Status LEDs |
1 x Power LED, 1 x Aux LED, 16 x ETH status LEDs, 2 x SFP status LEDs |
|
Reset |
Software reset button |
|
Casing material |
Anodized aluminium housing and panels |
|
Dimensions (W x H x D) |
132 x 44.2 x 122.2 mm |
|
Weight |
610 g |
|
Mounting options |
Integrated DIN rail bracket, wall mounting (additional kit needed), flat surface placement |
|
Operating temperature |
-40 °C to 75 °C |
|
Operating humidity |
10% to 90% non-condensing |
|
Ingress Protection Rating |
IP30 |
