Robustel B069705 Industrial 4G Gateway, dual Ethernet ports, dual SIM, WiFi

• Dual-SIM redundancy for continuous cellular network connections
• Link Manager supports Cellular WAN, Ethernet WAN, WLAN WAN link backup and ICMP detection
• WAN – Static/DHCP Client
• RobustOS + SDK + Apps
• IPsec/OpenVPN/GRE/Wireguard VPN capabilities
• Management and maintenance via Web/RCMS Cloud
• Auto reboot via SMS/time schedule
• Robust industrial design (9 to 36 V DC, desktop or wall mounting or DIN rail mounting)

The Robustel R2010 Industrial Cellular Gateway is a rugged, versatile 4G Gateway with dual Ethernet ports, dual SIM single standby capability and a range of advanced functions for mission critical IoT or M2M applications.

The R2010 takes into account the varying budgetary, interface and connectivity requirements of customers to create a simple and cost-competitive networking solution for customers deploying IoT solutions in industrial environments such as water, gas, electricity, factory automation and warehousing.

The R2010 runs on Robustel’s own Linux based Operating System, RobustOS. Developed entirely in-house, this gives way to a very high standard of technical support and high reliability. Robustel offers a Software Development Kit (SDK) to allow additional customization by using C, C++. It also provides rich Apps to meet fragmented IoT market demands such as:

RobustVPN

Highly ?exible hosted VPN service so customers can easily enjoy a “?xed IP Gateway”

Data-Guard

Invaluable failsafe in case of a system failure and runaway data usage

Smart Reboot

SMS tool to push roaming SIMs from a non-working to working state

Smart Roaming

Provides you with device-assisted intelligent network selection for roaming SIMs to improve performance and reduce risk.

Cellular Interface

Number of antennas      2 (MAIN + AUX) or 1 (MAIN)

Connector         SMA-K

SIM      2 Mini SIMs (2FF)

Ethernet Interface

Number of ports 2 x 10/100 Mbps, 2 x LAN or 1 x LAN + 1 x WAN

WAN port         Supports 802.3at PD feature (optional)

Magnet isolation protection        1.5 KV

Wi–Fi Interface

Number of antennas      2 (Wi-Fi1 + Wi-Fi2)

Connector         RP-SMA-K

Standards         802.11 b/g/n, supporting AP and Client modes

Frequency bands          2.4 GHz

Security            WEP, WPA, WPA2

Encryption        64/128 AES, TKIP

Data speed       2 x 2 MIMO, 300 Mbps

DI/DO  

Type     1 x DI, 1 x DO

Connector         1 x 4-pin 3.5 mm female socket

Signal definition

            DI+, DI-, DO+, DO-

 

Serial Interface 

Type     RS232 or RS485 (software configurable)

Connector         1 x 3-pin 3.5 mm female socket

Signal definition RS232: TXD, RXD, GND  RS485: A, B

 

Others

Reset button     1 x RST

LED indicators  1 x RUN, 1 x MDM, 1 x WIFI, 3 x RSSI

Built-in  Watchdog, Timer

 

Power Supply and Consumption

Connector         2-pin 3.5 mm female socket

Input voltage     9 to 36 V DC

Power consumption       Idle: 200 mA@12 V

Data link: 580 mA (peak)@12 V

 

Software (Basic features of RobustOS) 

Network protocols

            PPP, PPPoE, TCP, UDP, DHCP, ICMP, NAT, HTTP, HTTPs, DNS, ARP, BGP, RIP, OSPF, NTP, SMTP, Telnet, VLAN, SSH2, DDNS, etc.

VPN tunnel        IPsec, OpenVPN, GRE, WireGuard

Firewall DMZ, anti-DoS, Filtering (IP/Domain name/MAC address), Port Mapping, Access Control

Remote management     Web, CLI, SMS

Serial port         Transparent, TCP Client/Server, UDP, Modbus RTU Gateway

 

SDK    

Supported programming language

            C, C++

Flash available for SDK 16 MB

RAM available for SDK  64 MB

 

App Center (Available Apps for RobustOS)

Apps*   L2TP, PPTP, DMVPN, VRRP, QoS, Captive Portal, WLAN Multi AP, SNMP, Language, RCMS

*Request on demand. For more Apps please visit www.robustel.com.

 

 

Physical Characteristics

Ingress protection         IP30

Housing & Weight          Metal, 350 g

Dimensions       127 x 82 x 30 mm

Installations       Desktop, wall mounting and 35 mm DIN rail mounting

Operating temperature   -35 ~ +75?

Storage temperature      -40 ~ +85?

Relative humidity           5% ~ 95%

 

Regulatory and Type Approvals (*In progress)

Environmental   RoHS 2.0

EMI      EN 55032 Conducted Emission class B

            EN 55032 Radiated Emission class B

EMS     IEC 61000-4-2 (ESD) Level 4

IEC 61000-4-3 (RS) Level 2

IEC 61000-4-4 (EFT) Level 2

IEC 61000-4-5 (Surge) Level 2

IEC 61000-4-6 (CS) Level 2

IEC 61000-4-11(DIP)

 

Frequencies supported:

4G: LTE FDD: B1/B2/B3/B4/B5/B7/B8/B28, LTE TDD: B40

3G: WCDMA: B1/B2/B5/B8

2G: GSM: B2/B3/B5/B8