PoE Texas GPOES-8-7AB 8-Port Gigabit Passive PoE Switch, 7 PoE Ports and 1 Uplink

8-Port Passive PoE Switch (no power supply)

  • Power 24 or 48 volt PoE devices depending on power source used
  • Can be powered via another PoE switch, PoE Injector, 24V power supply or 48V power supply
  • Can act as a PoE repeater

Please feel free to contact us about this item, and we will recommend an IT Sales and Service Provider in your area.


Resellers: for pricing and to place orders.

In stock email will be sent.
Instock notification already exists.
Order SKU: Supplier Code:
  • 8 port switch with 7 passive PoE ports
  • 10/100/1000 Gigabit Ethernet capability
  • Use to power 24 or 48 volt PoE devices 
  • Unamanaged for easy install with VLAN transparancy
  • Passive "Always On" Power over Ethernet for versatility
  • Can be powered via another PoE switch or PoE injector on the uplink port
  • PoE repeater - Daisy-chain in series to extend Gigabit data up to 200m

Instantly add Passive PoE to your LAN
48v or 24v power supply required
7 PoE ports allow you to power multiple devices

Offers passive PoE mode B via dip switch for Ubiquiti and Mikrotik devices

Add 7 ports of PoE to your network. Run a single Ethernet cable up to 100 meters from your existing modem or router and connect to the switch to provide power and data to as many as 7 devices. Or run two GPOES-8-7AB switches in a series to extend your data reach to more than 200m.

Passive PoE means versatility. A Passive PoE injector always delivers the same voltage as its power source.

Choose PoE mode A or B. For 24V passive it should be set to mode B via dip switch.

Plug and Play - Unmanaged PoE switch with transparent VLAN throughput
Delivers passive "always on" power to the end device
Select Mode A, Mode B or Data only per port for compatibility options

Data + PoE Ports : 7
Data only Ports : 1
Data Rate : Gigabit
Dimensions : 19.05 x 8.255 x 3.175 cm
Operating Humidity : 5% to 90%
Operating Temperature Range : -10 - 60C
Output Voltage : 24 Volts
PoE Method : Passive
PoE Mode/Pinout : Mode A (-1,2 +3,6) / Mode B (+4,5 -7,8)
Power Input : 2.1 x 5.5 mm DC or PoE on uplink port