MOBOTIX MX-PROX-BOX Concealed Motion Detection Sensor for MOBOTIX Systems MX-Proximity-Box

Please feel free to contact us about this item, and we will recommend an IT Sales and Service Provider in your area.


Resellers: for pricing and to place orders.

In stock email will be sent.
Instock notification already exists.
Order SKU: Supplier Code:

The MX-Proximity-Box is a compact, weatherproof interface box (IP66) with integrated microwave radar sensor technology that can be connected to all cameras using MxBus. The MX-Proximity-Box detects moving objects using actively emitted and reflected radar waves. Since it can be installed
at distances of up to 100 m away from the camera (via MxBus connection), the MX-Proximity-Box is a helpful supplement to the passive infrared sensor (PIR) that is integrated with the D15, M15 and ExtIO as a standard.

Special Features Of The Radar Sensor As Compared To The PIR Sensor
The reception behavior of the radar sensor differs significantly from that of motion sensors on an infrared basis. While infrared sensors react relatively unresponsive to movements in a radial direction (straight approaching and distancing, such as a person approaching the door to a building or a car approaches a closed gate), radar sensors
are extremely sensitive to this type of motion. The reverse is true for sideways movements in front of the sensor.

Highlights

  • Radar wave-based detection of moving objects, even if there is no difference in temperature between these and the environment
  • Ideal supplement to PIR sensors that only react to infrared radiation
  • Detection of all kinds of movements, plus the option to filter out radial movements (only sends MxMessage for approaching/distancing objects, for instance)
  • Pre-defined profiles of approaching/distancing/movements for optimal detection of human movements
  • Completely concealed installation behind wood, plastic or drywall is possible (with reduced detection range)

MX-Proximity-Box: Technical Data

Ambient Temperature : -20 to 60°C (-4 to 140°F)
IP Class : IP66 (dust-proof and resistant to water jets)
IK Class : Corresponds to IK07 (protection against mechanical impacts of up to 2 joules: 500 g at a height of 20 cm)
Intended use : Not for use in areas at risk of explosions; connection to MxBus only
Dimensions (Height x Width x Depth) : 63 x 87 x 30 mm
Weight (Without Packaging) : 73 g
Connections : MxBus (2 clamps)
Power Supply : Via camera and MxBus
Power Consumption : 0.5 bis 1 W
Frequency (Radar Radiation) : ~24 GHz
Detection Range : 80° x 34° (horizontal x vertical), People: 0 bis max. 15 m, Vehicles: 0 bis max. 35 m
Detectable Movements : Approaching, distancing and general movements
Cross-Sectional Areas MxBus Wiring : 0.6 to 0.8 mm; recommendation: 0,8 mm J-Y(St)Y (AWG 21)
LED : 2x RGB, operating status and radar signal type (distancing/approaching/motion)
Housing : PBT GF30
Certifications:
EN 60950-1:2006/A11:2009/A1:2010/A2:2013/AC:2001/A12:2011
EN 301 489-1 V2.1.1, EN 301 489-3 V1.6.1, Draft EN 301 489-3 V2.1.0
EN 300 440-1 (V1.6.1); EN 300 440-2 (V1.4.1); (Draft EN 300 440 V2.1.0)
CFR 47 FCC Part 15C
RSS-310 ISSUE 4
Special Instructions : Length of the entire MxBus cable cannot exceed 100 m. Recommended installation height for detecting people: 1.00 - 1.20 m
MTBF : > 80.000 h