• VDSL Bridge
  • Ethernet Extender Kit, extend Ethernet via 2-wire (single pair) copper

Patton CL1314/EUI-2PK Ethernet Extender Kit, extend Ethernet via 2-wire (single pair) copper

Ethernet Extender Kit, extend Ethernet via 2-wire (single pair) copper

Auto data rate, Up to 2.74km reach at 5.7Mbps, Up to 6.9km reach at 256Kbps

Please feel free to contact us about this item, and we will recommend an IT Sales and Service Provider in your area.


Resellers: for pricing and to place orders.

In stock email will be sent.
Instock notification already exists.
Order SKU: Supplier Code:

Ethernet Extender Pair for 2-Wire Copper (such and telephone wire), with range of up to 2.74km at 5.7Mbps, and up to 6.9km at 256Kbps.

Patton CopperLink Ethernet Extender CL1314 two-pack, with remote and local extenders.

Symmetrical extended reach of 5.7 Mbps

4 x10/100Mbps Ethernet ports.

  • High Speed Extension—Achieve speeds up to 5.7 Mbps.
  • Multi-rate Selection—Just plug the units in and select the ideal user-configurable rate for your application.
  • CopperLink 2-Wire Connection—Easy 2-wire CopperLink connection via built-in RJ-11 port.
  • Built-in 4-port Ethernet Switch—Connect up to four Ethernet devices using the integrated 4 X 10/100Base-T, auto-sensing, full/half-duplex Ethernet switch.
  • Transparent LAN Bridging—Transparently pass higher-layer protocols with support for 802.1Q VLAN tagging.
  • Automatic Learning, Aging, and Filtering—Keeps local traffic local, ensuring efficient utilization of the long-range link.
  • Made in the USA — This Patton equipment is designed by Patton engineers and built in their Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.

 

  • Protocol: Transparent to higher layer protocols
  • Transmission Line: Single twisted pair
  • Line Rates: Rates from 192 kbps to 5.7 Mbps, selectable in all 64 kbps increments up to 5.7 Mbps
  • Front Panel LED Status Indicators: WAN: Link, LAN (Ethernet): Link/Act, Power
  • Line Coding: TC-PAM 16 for rates from 192 to 2.3 Mbps; TC-PAM 32 for rates above 2.3 Mbps
  • Connectors: RJ-45 on copper line side and 4 x 10/100 Ethernet, shrouded male IEC320 power connector
  • Line Interface: Transformer coupled, 1500 VAC isolation
  • Management: DIP switch, Telnet console
  • MTBF: 4.7 years
  • Power: External 90–260 VAC, 50–60 Hz (Universal Input)
  • Power Consumption: 0.8A@5V
  • Operating Temp. 32 to 122°F (0 to 50°C)
  • Humidity: 5 to 95%, non-condensing
  • Altitude: 0 to 15,000 ft (0 to 4,600 m)
  • Dimensions: 4.7 x 1.52 x 5.00 in. (106 x 390 x 127 mm)
  • Weight: 2.0 lbs (1.0 kg)
  • Compliance: FCC Part 15A, CE Mark per EMC directive 89/336/EEC and Low Voltage Directive 73/23/EEC
  • High Speed Extension—Achieve speeds up to 5.7 Mbps.
  • Multi-rate Selection—Just plug the units in and select the ideal user-configurable rate for your application.
  • CopperLink 2-Wire Connection—Easy 2-wire CopperLink connection via built-in RJ-11 port.
  • Built-in 4-port Ethernet Switch—Connect up to four Ethernet devices using the integrated 4 X 10/100Base-T, auto-sensing, full/half-duplex Ethernet switch.
  • Transparent LAN Bridging—Transparently pass higher-layer protocols with support for 802.1Q VLAN tagging.
  • Automatic Learning, Aging, and Filtering—Keeps local traffic local, ensuring efficient utilization of the long-range link.
  • Made in the USA — This Patton equipment is designed by Patton engineers and built in their Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.