Built-in LTE modem (dual SIM card slots)
1 x VDSL2/ADSL2+ WAN port
1 x configurable WAN/LAN port (Port 2)
1 x Gigabit Ethernet LAN port (Port 1)
2 x detachable LTE antennas
IPv6 & IPv4
2 x VPN tunnels including 2 x SSL-VPN tunnels
Bandwidth Management with intelligent VoIP QoS
Central Wireless AP Management (up to 2 Access Points)
Supports VigorACS 2 Central Management System for remote management
- Up to 100 Mbps VDSL Speed
- 2 x VPN tunnels (including 2 x SSL-VPN tunnels) IPsec Throughput up to 50 Mbps
- 2 x Gigabit Ethernet LAN ports (10/100/1000 Base-T RJ-45)
- 30,000 NAT sessions : Recommended for a network of up to 30 devices
LTE/4G category 4
150Mbps downstream and 50Mbps upstream
4G LTE FDD Band: 1, 3, 4, 5, 7, 8, 28
4G LTE TDD Band: 40
3G WCDMA Band: 1, 2, 5, 8
The Vigor2620 series is a VDSL2/ADSL2+ modem router with embedded dual SIM card slots for 4G/LTE failover. It is equipped with 2x Gigabit Ethernet LAN ports, one of which is switchable to an additional backup WAN interface.
The supported SIM cards include those from the major broadband service providers in Australia, Telstra, Optus, Vodafone, etc., as well as those in New Zealand, Spark, 2Degrees and Vodafone with speeds up to 150Mbps downstream and 50Mbps upstream.
The Vigor2620 series is a versatile router for a business networks of around 30 devices. It can have two concurrent VPN tunnels to link to the main offices or provides remote access for Network Admins. It also offers the flexibility for network management, including Port Forwarding, SPI Firewall, Content Filtering, Bandwidth Management, QoS and more.
Embedded Dual SIM Card Slots
Provide 4G/LTE Internet access for fixed line backup without the need for a USB dongle.
Firewall & Content Filter
Filter web pages by URL keyword or web category to block access to insecure or inappropriate content.
VPN (Virtual Private Network)
Build a secure and private tunnel from the LAN of Vigor2620 LTE to the remote offices and teleworkers over the Internet. Learn more
The free DDNS service for you to access the router by a fixed hostname of your choice. Setup Guide
Prevent one device using all the bandwidth by bandwidth limit policy, session limit policy, and QoS settings.
Central AP Management
Use the Vigor2620 LTE router as a wireless controller to maintain and monitor the VigorAPs.
2.4GHz - 802.11b/g/n Wireless
Wireless LAN On/Off button
2 Internal Wireless Antennas
Up to 4 SSIDs
Whitelist / Blacklist individual wireless clients per SSID (by MAC address)
Time Scheduling for Wireless radio and/or individual SSIDs
Active Client list in Web Interface
Station Control, limit wireless client access time per day
Wireless Client Isolation per SSID
Access Point Discovery
WDS (Wireless Distribution system) for WLAN Bridging and Repeating
WMM (Wi-Fi Multimedia) support