Mimosa B5-LITE B5-Lite Point-to-Point Kit, 802.11ac (incl. 2 APs plus brackets and Gigabit PoE adapters)

Please feel free to contact us about this item, and we will recommend an IT Sales and Service Provider in your area.

Resellers: for pricing and to place orders.

In stock email will be sent.
Instock notification already exists.
Order SKU: Supplier Code:

Mimosa B5-Lite Point to Point Complete Link (Two radios plus brackets)

The Mimosa B5-Lite is a complete, 'Auto-Everything' WiFi point-to-point kit for homes or businesses looking for a low-cost, effective solution to extend their networks beyond four walls, and to another location. Capable of 750+Mbps, the Mimosa B5-Lite can be accessed and monitored remotely using a simple registration form on the Mimosa Cloud*. This simple to install kit includes everything to get you started straight out of the box with B5-Lite units, pole mounts, brackets, screws, PoE injectors, and clips.

  • Low-cost solution to connect two buildings or locations together via WiFi.
  • Complete link in a box that includes the B5-Lite units and mounting poles.
  • Fast low latency 802.11ac data transfer rates of 750+Mbps between the points.
  • Auto-Everything automatically adjusts frequency, channel width and power levels.
  • High gain 5GHz 20dBi antenna for long-range point-to-point linking up to 15km.
  • Remote monitoring and management via the Mimosa Cloud service.*
  • Offers the best features of the B5 and B5c in a lightweight form factor (1.6lbs).
  • Auto everything

Wireless interference can change in an instant, and your network needs to adapt. The Mimosa B5-Lite offers constant spectrum analysis with historical and real-time data to dynamically make smarter decisions. The Auto Everything feature will automatically adjust frequency, channel width and power levels based on environmental feedback. This feature can be turned off for users that prefer more control.


This Mimosa B5-Lite Backhaul Outdoor 5Ghz 20dBi WiFi Point-to-Point PtP Link provides massive bandwidth in a tiny package. At 1.6 lbs per radio, your install just got a whole lot easier. To save you operating costs, Mimosa engineered the perfect solution for solar-based deployment: 750+ Mbps performance delivered in under 20W.

Low latency and high performance

The Mimosa TDMA protocol establishes a new benchmark for PHY:MAC efficiency, low latency, and spectrum re-use. Choose between the highest possible throughput TDMA slot times (which use high packet aggregation techniques), or low latency slot times to support latency-critical vertical applications.

Stream Power Peaking

Multi-stream MIMO radios normally settle on the lowest MCS rate across all the streams, severely degrading performance. Mimosa’s backhaul radios constantly advise the remote-side radio of individual stream receive levels, increasing those signal levels to meet the highest common attainable MCS rate.

Predictive AGC

When there’s a consistent signal from a single client, Mimosa’s Automatic Gain Control narrows the gain window of the receive signal amplitude for the next incoming packets (by 8 dB) to accelerate packet signal level detection. A technique by which the receiver is precision-activated only when packets are expected to arrive over the link. Thus reducing the potential interference typically seen if a receiver prematurely begins decoding.


Max Throughput

750+ Mbps
Low Latency

2+ ms
Wireless Protocols


MIMO & Modulation

2x2:2 MIMO OFDM up to 256 QAM

20/40/80 MHz channels tunable to 5 MHz increments
Frequency Range

4900-6000 MHz restricted by country of operation (*new* US/FCC 5600-5650 support)
Max Output Power

23 dBm
Sensitivity ( MCS 0 )

-87 dBm @ 80 MHz
-90 dBm @ 40 MHz
-93 dBm @ 20 MHz


20 dBi
Beamwidth ( 3dB )

14° (azimuth and elevation)
Cross-Polar Isolation

>20 dB

Dual 45° slant polarization

Max Power Consumption

15 W
System Power Method

802.3at compliant
PoE Power Supply

Passive POE compliant, 48-56 V Power over Ethernet supply with IEC61000-4-5 surge protection


Width: 153.31 mm Diameter: 260.33 mm

0.72 Kg
Enclosure Characteristics

Outdoor UV stabilized plastic
Wind Survivability

200 km/h (125 mph)
Wind Loading

39 kg @ 160 km/h (86 lbs @ 100 mph)

Single pole strap feed point integrated into plastic back plate with integrated curvature for contact with mounting poles. Azimuth and Elevation adjustability only provided via J-mount elevation adjustment and hose clamp loosened rotation on the pole.

Operating Temperature

-40°C to +55°C (-40°F to 131°F)
Operating Humidity

5 to 100% condensing
Operating Altitude

4420 m (14500') maximum
Shock & Vibration

ETS 300-019-2-4 class 4M5


Gigabit Ethernet

Management Services

Mimosa cloud monitoring and management SNMPv2 & Syslog legacy monitoring HTTPS HTML 5 based Web UI
Smart Spectrum Management

Active scan monitors/logs ongoing RF interference across channels (no service impact)
Dynamic auto-optimization of channel and bandwidth use

WPA2 + Mimosa 802.1x Client

Supports 4 pre-configured QoS levels