Product Overview
The LevelOne WAB-3003 108Mbps 802.11g Outdoor PoE AP is a Wi-Fi 802.11b/g device for long range wireless transmission. Its rugged IP68-rated metal housing is weatherproof, watertight and rust resistant, making it an ideal solution for deployments in harsh conditions, such as outdoor or industrial environments.

High Power Signal and Long Range Coverage
Tthe WAB-3003 operates as an Access Point station with wall-penetrating high-power signal and long-range coverage to better serve Wi-Fi clients.

Business Class Security and Multiple SSID/VLAN Tagging Support
One WAB-3003 with multiple SSIDs is capable of acting as multiple Virtual Access Points (VAPs). By tagging the traffic from each VAP with a unique VLAN ID, it allows for segmenting a corporate network by VLANs to protect critical resources.

Being a versatile Wi-Fi device, the WAB-3003 does not limit itself to outdoor usage only. When managed with a Wireless Access Controller (such as the LevelOne AMG-series), it performs as a Wi-Fi based station in either a public or private wireless access deployments.
 

Key Features
- Rugged, Compact, and Adaptive to Versatile Environments
- High Transmit Power
- High-Speed with QoS for Voice, Video, and Data Applications
- Power over Ethernet (PoE) & Flexible Mounting Options
- N-type Antenna Connector
- Business-Class Security and Multiple-SSID/VLAN tagging
- Supports 8 SSIDs
- Supports Access Point, WDS, Universal Repeater and CPE Modes

Technical Specifications:

Wireless Radio
Frequency band: 2.4 GHz
Modulations:
(1) 802.11b: DSSS (CCK, DQPSK, DBPSK)
(2) 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK)
Channels:
(1) USA (Channel 1~11)
(2) Japan (Channel 1~14)
(3) Europe (Channel 1~13)
Data rate with auto fallback:
(1) 802.11b: 1~11Mbps
(2) 802.11g: 6~108Mbps
Receiver sensitivity:
(1) 802.11b: 11Mbps@-89dBm
(2) 802.11g: 54Mbps@-74dBm
RF max. transmit power:
US version: 500 mW; EU version: 100 mW

CPE mode (Client gateway)
Gateway Features in CPE Mode
- Built-in NAT mode: To support IP sharing on the LAN side for multiple users (subscribers) to get access to the Internet
- Built-in DHCP server for issuing local IP addresses
- Built-in DDNS/DNS client
- Bandwidth management: To limit the uplink and downlink throughput
- Client connection control: For WISP’s operator to remotely suspend or resume the service for subscribers at the CPE
- IP/Port forwarding and DMZ

General Access Point Features
- Number of VAP (ESSID): 8
- Number of associated clients per VAP: 32
- Setting for maximum number of associated clients
- Beacon interval: Adjustable to best adapt to the deployment environment
- Auto fallback: Data rate for long distance communication in noisy environments
- IAPP: To provide a faster roaming capability for the stations between nearby APs
- 802.11g protection from surrounding stations that aren't part of it's own network
- RTS/CTS and fragmentation control
- ACK timeout support
- Adjustable transmission power: 5 levels
- Wireless site survey: For scanning surrounding access points
- Supports IEEE 802.11e WMM and QoS within WDS Link

Security
- Data encryption: WEP (64/128/152-bits), WPA/WPA2 with TKIP or AES-CCMP with key's refreshing period setting
- User Authentication: WEP, IEEE 802.1X, WPA-PSK, WPA-RADIUS, MAC ACL, MAC authentication using RADIUS with built-in 802.1X Authenticator
- Supports IEEE 802.11 mixed mode; open and shared key authentication
- Hidden ESSID: Broadcast SSID enable / disable
- Station Isolation : All associated stations can not communicate with each other when enabled
- Supports AES data encryption over WDS link
- Built-in Layer 2 Firewall, blocking Dynamic ARP Inspection & DHCP Snooping

Administration
- Software one-button-click to reset factory defaults
- Web-based management interface with remote configuration management and firmware upgrade capabilities
- Utilities for system configuration backup and restoration
- Two administration accounts in CPE mode:
(1) “root” for the WISP administrator, who can change all settings including bandwidth limit
(2) “admin” for the local administrator, who can view all settings and change only some preferences
- SNMP MIBII support (v1/v2c)
- NTP time synchronization
- Watch dog: Auto recovery when detecting system fault
- Syslog client
- Supports Event Log and SYSLOG reporting to external server
- Supports RADIUS accounting and accounting update
- Supports statistics on total transmission encountered and transmitting error occurred

Hardware and Environment
- Metal case: Weather proof, compliant with IP68 Standards
- LAN Port: 1 × 10/100 Base-TX Ethernet with PoE
- N-type (female) connector for external antenna
- LED Indication: Power x 1; Ethernet x 1; Wireless x 1, Wireless Signal Strength x 3
- PSE for PoE: DC 48V/0.4A
- Form Factor: Wall or Pole Mountable
- Dimension (W x D x H): 6.5” x 3.8” x 1.9” (165 x 96 x 48 mm)
- Weight: 1.6 lbs (0.72 kg)
- Operation Temperature: -30 ~ +70 °C (-22 ~158oF)
- Storage Temperature: -40 ~ +85 °C (-40~185 oF)
- Operation Humidity: 100% maximum (Non-condensing)
- Storage Humidity: 100% (Non-condensing)
Certifications
FCC, CE, IP68, RoHS compliant